Model Number

DC-005

Key Specifications/Special Features:

• Electronics characteristics:
  • Rating: DC 12V, 1A
  • Contact resistance: 1kHz measured at small current (1A or less)
  • Insulation resistance: a voltage of 500V DC shall be applied for a minute, and between conductors which should not make contact under normal conditions after which measurement shall be made
  • Dielectric strength: between conductors which should not make contact under normal conditions 500V AC (50-60Hz) for 1 minute (trip current 2mA)
• Endurance characteristics:
  • Solder ability: the terminals shall be dipped into soldering flux and shall be immersed into molten solder of 230±5 degrees for a period 3±0.5 seconds
• Resistance to soldering heat:
  • Solder temperature: 350±10
  • Immersion depth: 2±0.5mm
  • Immersion time: 3±0.5 seconds
  • By a solder iron to have capacity of 60W
• Cold: the jack shall be stored at a temperature of -40±2 for 96 hours
• It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
• Dry heat: the jack shall be stored at a temperature of -70±2 for 96 hours
• It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
• Humidity: the pin jack shall be subject to 90%-95%RH, 40±2 for 96 hours, and shall be conditioned at room ambient conditions for a period of 30 minutes